QuoteAPPROVED CLUB RACING RULES PACKAGE
These rule changes will become effective 1/1/2016, unless indicated otherwise.
Spec Miata
SM
1. #16474 (September Fastrack – Ralph Provitz) Driver Seating Position
Change 9.1.7.C.7.a.: a. The driver's seat shall be replaced with a one-piece bucket-type race seat. All seat mountings shall
be reinforced. Factory seat tracks/brackets may be modified, reinforced, and/or removed to facilitate replacement mountings
provided they perform no other function. The passenger seat must be removed. The transmission tunnel may be modified for
the purpose of installing a competition driver seat. The driver's side floor pan may be modified to accommodate larger/taller
drivers. All modifications shall be contained between the transmission tunnel, driver's side rocker, rear bulkhead and no more
than 24" forward of the rear bulkhead. The modification shall not extend below the factory floor stiffener/frame rail. The steel
used in the modification shall be no thinner than .060". All modifications shall be welded in place. This modification shall serve
no other purpose other than seating position.
http://cdn.growassets.net/user_files/scca/downloads/000/010/048/15-fastrack-November.pdf
Chris